freshuaejobs.com

90 Jobs in Sharjah Industrial Area 7, Sharjah, UAE

Certified Electrical Engineer With 4 Year Experience In Mep Construction Vacancy

AFZAL SHMASUDEEN PRESENT ADDRESS Email: FLAT NO: 1508 DULF TOWER OFFICE AL NAHDHA, SHARJAH UNITED ARAB EMIRATES MOBILE: + (UAE) (HOME):+918129688573 (INDIA) _ ELECTRICAL ENGINEER (MEP) WITH FOUR + YEARS EXPERINCE Seeking a challenging and rewarding opportunity with an organization of repute, which recognizes and utilizes my true potential while nurturing my analytical and technical skills in the field of Electrical Engineering especially in Electrical Constructions filed EXPERINCE SUMMARY: Electrical Engineer with more than 4 Years of experience with good knowledge of the Electrical safety (Lock out-Tag out system, E-Permit & Normal Work Permit), National &International Codes and standards. Handled MEP Electrical Design Projects (KSEB, DEWA, ADDC), Different Electrical &Mechanical Energy Auditing Projects, Energy Conservation Trainings, Project procurement& Preparing BOQ for Different industrial Projects, Estimation costing, Standard measures to follow for Plant process. _ TECHNICAL SKILLS:- • Good knowledge in Electrical design software. • Good knowledge in Electrical, Plumbing, HVAC and Fire fighting systems. • Good knowledge in low voltage and High voltage power network. • Planning, designing and implementation of large MEP projects including Electrical design, • ELV systems (CCTV, access control, intercom, gate barrier, CATV, fire Alarms • Review and use of inspection checklist for various installations, testing and commissioning works. • Harmonics data analyzing, power factor • Inspection & Testing of cables, Cable sizing & loss reduction, ELV systems-UPS & Battery • Designing, Design of Switchgear panels,ACB, VCBs, CT, PT, Low voltage breaker modules(MCB,MCCB,RCD,RCBO,ELCB etc) • Well managed with Electrical Safety and Standards measures, Hazardous area Classification, all types of Permit system including E-permit, lock out, Tag out system, co-ordination of protective relays Etc. • Followed Company's guidelines and policies and scheduled works. • improvement, Switchgear systems(HV/LV modules) and Electrical Testing Instruments • Conduct regular and periodic inspection of all project document, NCR’s records and Redline Drawings. • Have sufficient knowledge in load survey, selection of transformers with primary • and secondary protections, Cables, Bus bar trunking, earthing etc • Managed the power distribution system, it included electrical equipment layout and single line diagrams. • Prepared a list of all electrical equipment’s and circuits in the plant and distributed the power accordingly • Coordinated with the external vendors and participated in various meetings, reviewed the design for the system. • Handled the quotations from the vendors and analyzed it with the recent purchases. • Verified the project design and ensured that all plant operations were accounted in the project. • To provide the proper Preventive maintenance of machines • Handling of electrical load as per requirement DESIGINING • Mechanical Electrical and Plumbing design using AutoCAD and higher software • Basic idea in REVIT Designs • Energy Efficient Lighting Design of Using Utility software’s like CG LUX ELECTRICAL ENGINEER WITH FOUR + YEARS’ EXPERIENCE  CAPITOL ENGINEERING AND CONSTRUCTION PVT.LTD TRIVANDRUM, From November, 2015 to July, 2017 Designation: MEP Engineer MEP INSTALLATION PROJECT HANDLED: 1. Name: Commercial Building project (G+7) Client: Asset Homes, Trivandrum MEP DESIGN PROJECTS HANDLED 1. Name: Amina Residence Building (G+4P+15 Floor) Consultant: Inspiration Consulting Engineers, Dubai. 2. Name: Park Inn JVT (B+G+4P+25 Floor ) Consultant: ZAS Group of companies, Dubai.  HI TECH ELECTRICALS PVT.LTD, THRISSUR Keara 2013 to October 2015 Hi tech Electricals Pvt. Ltd is a Project Development & Management company. They provide Electrical Low voltage, Medium voltage & High voltage design, and Installations to Industries, Shopping Malls, Hospital Facilities, Hotels, Resorts, Educational Institutions etc EXPERIENCE SUMMARY • Project 1: ST.Reddiar & Sons Printing Press Kakkanadu, Ernakulam Designation: Quality Inspection Engineer (Project & Maintenance) Responsibility  Handling of electrical load as per requirement.  To co-ordinate with Electrical Contractor for Electrification, Execution, Erection & Commissioning.  To provide the entire electrical solutions as per requirement.  To check the entire work as according to approved drawings.  To co-ordinate with KSEB for all electrical approvals. • Project 2: Quantalogic IT Solutions Kadavanthara, Kochin Designation: Project Engineer (Project & Maintenance) Responsibility  Handling of electrical load as per requirement.  To provide the entire electrical solutions as per requirement.  To provide the proper Preventive maintenance of machines. • Project 3: Syama dynamics & Yes Bank Vytilla, Kochin Designation: Project Electrical Engineer (Maintenance) Responsibility  Han
-Source (Mitula)
Advertisements

Walk in Interviews for Graphic Designer in Sharjah Job

Junior Graphic Designer required for an advertising company in Sharjah. Male Candidate, Must have experience in Photoshop, Illustrator, Corel Draw with good spoken skills in English. Salary: AED 2000.00 (negotiable) with accommodation. Walk-in interviews from 10:30am to 1:30pm and 4:30pm to 7:30pm. Email Cv to or walk-in on the timings given above from Saturday-Thursday
-Source (Mitula)

Required Senior Auto Mechanic With Valid UAE License

Responsibility 1)Greet customers when they arrive and take a detailed history of vehicle performance or mechanical failure 2)Diagnose vehicles based on observational and mechanical testing as well as information provided by the customer 3)Provide customers with detailed estimates for repairs and replacements and obtain signature approval prior to commencing work 4)Repair vehicles based on the diagnosed issues and repair estimate 5)Test drive vehicles after repairs are complete to ensure mechanical soundness and to determine whether any other problems exist 6)Describe vehicles condition to customer and answer any follow-up questions 7)File appropriate documentation on each repair Requirements Valid U.A.E Driving license is a must Well versed in computer diagnosing software (Launch Public Relations Officer ) Min 5 years U.A.E. experience as Auto Mechanic Quick learner and a self starter to accepting new challenges
-Source (Mitula)

Instrumentation and Control Engineer Seeking Job

A highly qualified and dedicated Instrumentation Engineer with more than 2-years of experience in UAE as an Instrumentation and Control Engineer- Design, Procurement, construction and execution experience for Industrial and Oil and Gas Projects. I am currently working in an EPC Company in SAIF Zone, Sharjah, UAE. Holding valid UAE driving License. Roles and Responsibility: 1.Developing project schedule, document control schedule and procurement schedule for Electrical and Instrumentation scope of work. 2.Detail study of FEED documents, specification, P and ID, conducting site survey and developing detailed engineering documents. 3.Meeting with the Client, Consultant and supplier/subcontractor as required for project implementation or proposal. 4.Involved in planning and scheduling of project management activities. 5.Developing engineering deliverables such as Instrument Index, Instrument Datasheets, IO list, Alarm/Trip and set point list, Cable Schedules, General Block diagram, Loop diagram, JB interconnection diagram and Instrument Hook up diagram. 6.Review of tender documents, scope of works, drawings and specification, BOQ, Raise Technical clarifications Technical Evaluation of materials and finalization of material. 7.Knowledge and Experience in International Standards and codes. 8.Selection of Field Instruments based on Process condition and service according to Area Classification. 9.Developing Fire Alarm System and CCTV system documents such as Datasheets, Schematic drawing, Cable Schedule and Layouts. 10.Providing necessary inputs to Designer for developing Instrument location layout, cable routing layout and System Architecture after doing necessary site survey. 11.Review of Construction related drawings, P and ID, Hazardous Area Layouts and vendor engineering drawings, other disciplines drawings 12.Responsible for submission of Engineering deliverables as per Document control schedule. 13.Preparing detailed procurement schedule containing all E and I materials, list of vendor/supplier for each items and planned dates for RFQ, PO, Manufacturing Clearance and Delivery. 14.Preparation of Material submission for the consultant review and approval. 15.Developing RFQs and sending to different suppliers/vendors and getting the quote as per the schedule. 16.Reviewing the techno commercial offer, technically clearing the items in coordination with supplier/vendor and negotiating with them for best price, payment terms and delivery. 17.Developing purchase order with necessary terms and condition. 18.Developing purchase order with necessary terms and condition. 19.Tight follow-up with vendor for delivery of material Updating procurement schedules as per the actual status of RFQ, PO, manufacturing clearance and Delivery of Material. 20.Installation, Testing and commissioning assistance for field instruments like Pressure switch, Level Switch, Flow Switch, RTG, Pressure Transmitter, Flow Transmitter, Level Transmitter and MOVs. 21.Working Knowledge in serial communication like Modbus and Profibus 22.Responsible for raising material and work inspection request, carrying out the inspection of the complete work and getting approval from the consultant
-Source (Mitula)

Instrumentation And Control Engineer Seeking Job in Dubai

A highly qualified and dedicated Instrumentation Engineer with more than 2-years of experience in UAE as an Instrumentation and Control Engineer- Design, Procurement, construction and execution experience for Industrial and Oil and Gas Projects. I am currently working in an EPC Company in SAIF Zone, Sharjah, UAE. Holding valid UAE driving License. Roles and Responsibility: 1.Developing project schedule, document control schedule and procurement schedule for Electrical and Instrumentation scope of work. 2.Detail study of FEED documents, specification, P and ID, conducting site survey and developing detailed engineering documents. 3.Meeting with the Client, Consultant and supplier/subcontractor as required for project implementation or proposal. 4.Involved in planning and scheduling of project management activities. 5.Developing engineering deliverables such as Instrument Index, Instrument Datasheets, IO list, Alarm/Trip and set point list, Cable Schedules, General Block diagram, Loop diagram, JB interconnection diagram and Instrument Hook up diagram. 6.Review of tender documents, scope of works, drawings and specification, BOQ, Raise Technical clarifications Technical Evaluation of materials and finalization of material. 7.Knowledge and Experience in International Standards and codes. 8.Selection of Field Instruments based on Process condition and service according to Area Classification. 9.Developing Fire Alarm System and CCTV system documents such as Datasheets, Schematic drawing, Cable Schedule and Layouts. 10.Providing necessary inputs to Designer for developing Instrument location layout, cable routing layout and System Architecture after doing necessary site survey. 11.Review of Construction related drawings, P and ID, Hazardous Area Layouts and vendor engineering drawings, other disciplines drawings 12.Responsible for submission of Engineering deliverables as per Document control schedule. 13.Preparing detailed procurement schedule containing all E and I materials, list of vendor/supplier for each items and planned dates for RFQ, PO, Manufacturing Clearance and Delivery. 14.Preparation of Material submission for the consultant review and approval. 15.Developing RFQs and sending to different suppliers/vendors and getting the quote as per the schedule. 16.Reviewing the techno commercial offer, technically clearing the items in coordination with supplier/vendor and negotiating with them for best price, payment terms and delivery. 17.Developing purchase order with necessary terms and condition. 18.Developing purchase order with necessary terms and condition. 19.Tight follow-up with vendor for delivery of material Updating procurement schedules as per the actual status of RFQ, PO, manufacturing clearance and Delivery of Material. 20.Installation, Testing and commissioning assistance for field instruments like Pressure switch, Level Switch, Flow Switch, RTG, Pressure Transmitter, Flow Transmitter, Level Transmitter and MOVs. 21.Working Knowledge in serial communication like Modbus and Profibus 22.Responsible for raising material and work inspection request, carrying out the inspection of the complete work and getting approval from the consultant. Email
-Source (Mitula)

Electrician

The Electrician is to monitor and maintain the electrical services in the academic area. Responsible for attending service calls, regular maintenance, electrical installation, troubleshooting and repair works, and providing support services to events, coordinating and supervision of subcontractors for annual maintenance contractors and special projects. Job Responsibilities: Maintain switchgear and associated control systems Analyse and identify defects, troubleshoot and rectify defects to keep the LV Power distribution system in optimum performance Check and ensure proper operation of MDBs, SMDBs, MCCs, capacitor banks, DBs as per preventive maintenance plan Check and ensure proper operation of motor starters, controllers, VFDs and control systems Check and ensure proper operation of LCP panels, presence detectors, lighting controllers, timers, relays Checks and ensure proper operation of generators, generator control panels, ATSs & synchronizing panels Carryout daily routine checks and repairs of all electrical permanent installation and reports any deficiencies, backlogs and faults. Prepare and update panel load schedules/drawings, log books, etc. Replacing fused tube lights, neon bulbs, defective ballasts and repairing luminaires Replacing small power sockets, industrial plugs, fuses, breakers, wiring and maintaining continuity of power Repairing and maintaining projector type flood lights on roofs and perimeter of the buildings, wall wash lights, column lights including connections and timer adjustment Replacing fused bulbs, defective ballasts, chokes, igniters and repairing luminaires Electrical installation as per BS7671. Cabling, installing containment, installing, luminaires, socket outlets, DBs, starters Carrying out live/dead tests, functional test of electrical circuits and equipment Carrying out switching operations, providing shut down and safe energization of electrical installations Carrying out the lockout/tag out and following the permit to work system Carrying out testing and commissioning of LV Panels, MCCs, DBs, LCPs etc. Carryout inspections of electrical installations in special projects Supervise subcontractors caring out electrical installation works in special projects Attend to the work requests through Agility System as allocated by the foreman/engineer Perform other duties as directed by the foreman/engineer Qualifications & Skills Required: 3 year Technical Diploma in Technology Minimum of 5 years' experience in UAE or 7 years' experience in GCC countries. Total experience of 10 years or more which includes minimum 3 years' experience in maintenance of electrical services. Fair knowledge in English is a must (written and spoken) Age: Should be below 50 years Preferred Qualifications: Knowledge of BMS and controls Basic understanding of computer UAE driving license
-Source (Mitula)
Advertisements

Instrumentation & Control Engineer Seeking Job Sharjah

DescriptionA highly qualified and dedicated Instrumentation Engineer with more than 2-years of experience in UAE as an Instrumentation and Control Engineer- Design, Procurement, construction and execution experience for Industrial and Oil and Gas Projects. I am currently working in an EPC Company in SAIF Zone, Sharjah, UAE.Holding valid UAE driving License.Roles and Responsibility:1.Developing project schedule, document control schedule & procurement schedule for Electrical & Instrumentation scope of work.2.Detail study of FEED documents, specification, P&ID, conducting site survey and developing detailed engineering documents.3.Meeting with the Client, Consultant and supplier/subcontractor as required for project implementation or proposal.4.Involved in planning and scheduling of project managementactivities.5.Developing engineering deliverable's such as Instrument Index, Instrument Datasheets, IO list, Alarm/Trip & set point list, Cable Schedules, General Block diagram, Loop diagram, JB interconnection diagram & Instrument Hook up diagram.6.Review of tender documents, scope of works, drawings and specification, BOQ, Raise Technical clarifications Technical Evaluation of materials and finalization of material.7.Knowledge and Experience in International Standards and codes.8.Selection of Field Instruments based on Process condition and service according to Area Classification.9.Developing Fire Alarm System and CCTV system documents such as Datasheets, Schematic drawing, Cable Schedule & Layouts.10.Providing necessary inputs to Designer for developing Instrument location layout, cable routing layout and System Architecture after doing necessary site survey.11.Review of Construction related drawings, P & ID, Hazardous Area Layouts and vendor engineering drawings, other disciplines drawings12.Responsible for submission of Engineering deliverable's as per Document control schedule.13.Preparing detailed procurement schedule containing all E&I materials, list of vendor/supplier for each items and planned dates for RFQ, PO, Manufacturing Clearance & Delivery.14.Preparation of Material submission for the consultant review and approval.15.Developing RFQ's and sending to different suppliers/vendors and getting the quote as per the schedule.16.Reviewing the techno commercial offer, technically clearing the items in coordination with supplier/vendor and negotiating with them for best price, payment terms and delivery.17.Developing purchase order with necessary terms and condition.18.Developing purchase order with necessary terms and condition.19.Tight follow-up with vendor for delivery of material Updating procurement schedules as per the actual status of RFQ, PO, manufacturing clearance and Delivery of Material.20.Installation, Testing and commissioning assistance for field instruments like Pressure switch, Level Switch, Flow Switch, RTG, Pressure Transmitter, Flow Transmitter, Level Transmitter and MOV's.21.Working Knowledge in serial communication like Modbus and Profibus22.Responsible for raising material and work inspection request, carrying out the inspection of the complete work and getting approval from the consultant
-Source (Mitula)

Required Automobile Workshop Supervisor Service Adviser

Job Description Responsibilities:- 1.Ensure full utilization of workshop available labor and resources to achieve planned operational targets 2.Supervise subordinates to produce quality work 3.Allocate job cards and manages technicians to maximize the throughput by aligning jobs to skill sets within team 4.Ensure that the technicians carry out the jobs within the allotted time. 5. Ensure all pre-orders are approved and obtains customer approval for all additional work 6.Recommend warranty jobs for the approval of either Service Manager, Workshop Manager. 7. Ensure the workshop observes all warranty process conditions, and supervises the correct tagging and storage of warranty parts. 8. Ensure all required information on each job card for each job is properly maintained. 9. Inform the Service Adviser and Workshop Manager if necessary on any unclear working instructions or costly extensions on the repair 10. Has sufficient knowledge in using computer diagnosing systems and workshop/vehicle software Skills:- Currently working for in U.A.E. as Workshop Supervisor/Service adviser At least 3 years U.A.E. experience in a fully equipped automobile workshop Customer service oriented Effective communicator Stress Management aptitude and problem solver Firm and organised, with leadership skills
-Source (Mitula)

Sales Manager Job in Dubai

A leading manufacturing company in sharjah is looking for Local Sales Manager. Candidates who have experience in Production and Manufacturing, Building materials will be an added advantage. Experience: 7 10 years Education: Degree Must have valid UAE Driving License Kindly send your updated CVs to For any further clarifications kindly contact Farook @
-Source (Mitula)

Required Auto Electrician in Dubai

JOB DUTIES AND RESPONSIBILITIES 1.To diagnose and undertake electrical repairs on a wide variety of vehicles and plant. 2.To undertake electrical installation of accessories and ancillary equipment on a wide variety of vehicles and plant. 3.To test and repair digital control systems including ABS controls. 4.To service and repair ancillary parts and equipment as required. 5.To inspect, maintain and repair all types of petrol and diesel engine motor vehicles and plant operated by the Authority and its customers. 6.To requisition parts and equipment as necessary. 7.To liaise with manufacturers and/or agents on problems to achieve an efficient repair. 8.To keep own vehicle clean and tidy and clean and tidy any site or work area after use (if appropriate). 9.To complete all documentation including inspection sheets, certificates, receipts applying signatures as appropriate. 10.To note the details of any accident incurred whilst driving any vehicle owned, operated by or in the custody of County Transport and submit them to the Foreman Mechanic or Service Manager. 11.To identify repairs required through unfair wear and tear and advise the Service Manager/Foreman mechanic. 12.To undertake training as may be required and product training by consultation. 13.To carry out work within a realistic time, be this time either manufacturers, locally negotiated or a combination of both or by agreed schedules of work. 14.To record all times and attendance hours to facilitate payment. 15.To be read in conjunction with County Transport General Requirements. 16.Duties and Responsibilities General
-Source (Mitula)

Wanted Logistics Coordinator in Dubai

Should be a Graduate with 5 to 7 years experience in Import-Export / Logistics and distribution. Should be well-conversant with traffic department rules and regulations, payment of fines and penalties, registration, etc. Billing, invoicing, supply chain, operations and related documentation skills required. ERP knowledge and experience essential. UAE Driving license an advantage. Should be present in UAE for interview. Freshers excused. Email your resume to
-Source (Mitula)

Wanted Installation Engineer Tower Cranes and Construction Hoists

Mandatory: Should be a Mechanical Engineer with 5 to 7 years experience on installation and repairs of: Tower cranes, Hoists, platforms, European brand, Technicians, Mechanics, Electricians, Installation, Maintenance, Trouble-shooting, Potain, Liebherr, Terrx, Comansa, Wolffkran, Alimak, GJJ, Geda etc. Should be present in the UAE for interview. Email your resume to
-Source (Mitula)

Proposal Engineer Waste Water Treatment Plants Sharjah Job

Job Description 1. Responsible for all aspects of Proposal Management including process design and cost estimation. 2. Lead the Proposal process to structure creative, commercially and technically sound quality documents as per the budget and within specified time frames. 3. Ensure specification compliance and also evaluate viable and competitive alternate process technologies / schemes. 4. Prepare Process Calculations, Hydraulic Calculations, P and ID, Layout, Process flow and Mass Balance Diagrams and Hydraulic flow Diagrams, etc. 5. Prepare Mechanical equipment list, Bill of quantities and estimate costs 6. Develop and maintain Cost Data files for various bought out items and update them periodically 7. Provide prompt resolutions to the project team if there are any technical issues during the execution stage and ensure that budget cost are adhered to. Send us the CV on Salary: Attractive tax free salary plus annual benefits Industry: Water Treatment / Waste Management Functional Area: Sales, Business Development Role Category: Corporate Sales Role: Proposal Keywords: Waste Water Treatment, Proposals Desired Candidate Profile Education UG B. TECH/B.E. Chemical) Applicants should be aged 26 to 30 years with a degree in Chemical engineering with 4 to 8 years in the Proposal function of a waste water treatment company. Experience in waste water treatment systems such as MBR, MBBR, SBR, etc. is desirable. They should also have good knowledge of process design and cost estimation of waste water treatment plants. Company Profile Water and waste water Treatment Company based at Sharjah in the UAE. They manufacture, distribute and supply a range of state of the art water treatment solutions for industrial, commercial and domestic applications. Their equipment include R.O. and D.M Plants of small to medium capacity, water filtration and high purity systems, UV disinfection systems, electro dialysis reversal, softeners, STPs and water packaging machinery. For their commercial and industrial water and waste water treatment operations, which also includes water treatment chemicals, they require a talented chemical engineering professional with experience in Proposals for waste water treatment plants
-Source (Mitula)
Page No: 1