freshuaejobs.com

60 Jobs in Sharjah Industrial Area 8, Sharjah, UAE

Instrumentation and Control Engineer Seeking Job

A highly qualified and dedicated Instrumentation Engineer with more than 2-years of experience in UAE as an Instrumentation and Control Engineer- Design, Procurement, construction and execution experience for Industrial and Oil and Gas Projects. I am currently working in an EPC Company in SAIF Zone, Sharjah, UAE. Holding valid UAE driving License. Roles and Responsibility: 1.Developing project schedule, document control schedule and procurement schedule for Electrical and Instrumentation scope of work. 2.Detail study of FEED documents, specification, P and ID, conducting site survey and developing detailed engineering documents. 3.Meeting with the Client, Consultant and supplier/subcontractor as required for project implementation or proposal. 4.Involved in planning and scheduling of project management activities. 5.Developing engineering deliverables such as Instrument Index, Instrument Datasheets, IO list, Alarm/Trip and set point list, Cable Schedules, General Block diagram, Loop diagram, JB interconnection diagram and Instrument Hook up diagram. 6.Review of tender documents, scope of works, drawings and specification, BOQ, Raise Technical clarifications Technical Evaluation of materials and finalization of material. 7.Knowledge and Experience in International Standards and codes. 8.Selection of Field Instruments based on Process condition and service according to Area Classification. 9.Developing Fire Alarm System and CCTV system documents such as Datasheets, Schematic drawing, Cable Schedule and Layouts. 10.Providing necessary inputs to Designer for developing Instrument location layout, cable routing layout and System Architecture after doing necessary site survey. 11.Review of Construction related drawings, P and ID, Hazardous Area Layouts and vendor engineering drawings, other disciplines drawings 12.Responsible for submission of Engineering deliverables as per Document control schedule. 13.Preparing detailed procurement schedule containing all E and I materials, list of vendor/supplier for each items and planned dates for RFQ, PO, Manufacturing Clearance and Delivery. 14.Preparation of Material submission for the consultant review and approval. 15.Developing RFQs and sending to different suppliers/vendors and getting the quote as per the schedule. 16.Reviewing the techno commercial offer, technically clearing the items in coordination with supplier/vendor and negotiating with them for best price, payment terms and delivery. 17.Developing purchase order with necessary terms and condition. 18.Developing purchase order with necessary terms and condition. 19.Tight follow-up with vendor for delivery of material Updating procurement schedules as per the actual status of RFQ, PO, manufacturing clearance and Delivery of Material. 20.Installation, Testing and commissioning assistance for field instruments like Pressure switch, Level Switch, Flow Switch, RTG, Pressure Transmitter, Flow Transmitter, Level Transmitter and MOVs. 21.Working Knowledge in serial communication like Modbus and Profibus 22.Responsible for raising material and work inspection request, carrying out the inspection of the complete work and getting approval from the consultant
-Source (Mitula)
Advertisements

Instrumentation And Control Engineer Seeking Job in Dubai

A highly qualified and dedicated Instrumentation Engineer with more than 2-years of experience in UAE as an Instrumentation and Control Engineer- Design, Procurement, construction and execution experience for Industrial and Oil and Gas Projects. I am currently working in an EPC Company in SAIF Zone, Sharjah, UAE. Holding valid UAE driving License. Roles and Responsibility: 1.Developing project schedule, document control schedule and procurement schedule for Electrical and Instrumentation scope of work. 2.Detail study of FEED documents, specification, P and ID, conducting site survey and developing detailed engineering documents. 3.Meeting with the Client, Consultant and supplier/subcontractor as required for project implementation or proposal. 4.Involved in planning and scheduling of project management activities. 5.Developing engineering deliverables such as Instrument Index, Instrument Datasheets, IO list, Alarm/Trip and set point list, Cable Schedules, General Block diagram, Loop diagram, JB interconnection diagram and Instrument Hook up diagram. 6.Review of tender documents, scope of works, drawings and specification, BOQ, Raise Technical clarifications Technical Evaluation of materials and finalization of material. 7.Knowledge and Experience in International Standards and codes. 8.Selection of Field Instruments based on Process condition and service according to Area Classification. 9.Developing Fire Alarm System and CCTV system documents such as Datasheets, Schematic drawing, Cable Schedule and Layouts. 10.Providing necessary inputs to Designer for developing Instrument location layout, cable routing layout and System Architecture after doing necessary site survey. 11.Review of Construction related drawings, P and ID, Hazardous Area Layouts and vendor engineering drawings, other disciplines drawings 12.Responsible for submission of Engineering deliverables as per Document control schedule. 13.Preparing detailed procurement schedule containing all E and I materials, list of vendor/supplier for each items and planned dates for RFQ, PO, Manufacturing Clearance and Delivery. 14.Preparation of Material submission for the consultant review and approval. 15.Developing RFQs and sending to different suppliers/vendors and getting the quote as per the schedule. 16.Reviewing the techno commercial offer, technically clearing the items in coordination with supplier/vendor and negotiating with them for best price, payment terms and delivery. 17.Developing purchase order with necessary terms and condition. 18.Developing purchase order with necessary terms and condition. 19.Tight follow-up with vendor for delivery of material Updating procurement schedules as per the actual status of RFQ, PO, manufacturing clearance and Delivery of Material. 20.Installation, Testing and commissioning assistance for field instruments like Pressure switch, Level Switch, Flow Switch, RTG, Pressure Transmitter, Flow Transmitter, Level Transmitter and MOVs. 21.Working Knowledge in serial communication like Modbus and Profibus 22.Responsible for raising material and work inspection request, carrying out the inspection of the complete work and getting approval from the consultant. Email
-Source (Mitula)

Instrumentation & Control Engineer Seeking Job Sharjah

DescriptionA highly qualified and dedicated Instrumentation Engineer with more than 2-years of experience in UAE as an Instrumentation and Control Engineer- Design, Procurement, construction and execution experience for Industrial and Oil and Gas Projects. I am currently working in an EPC Company in SAIF Zone, Sharjah, UAE.Holding valid UAE driving License.Roles and Responsibility:1.Developing project schedule, document control schedule & procurement schedule for Electrical & Instrumentation scope of work.2.Detail study of FEED documents, specification, P&ID, conducting site survey and developing detailed engineering documents.3.Meeting with the Client, Consultant and supplier/subcontractor as required for project implementation or proposal.4.Involved in planning and scheduling of project managementactivities.5.Developing engineering deliverable's such as Instrument Index, Instrument Datasheets, IO list, Alarm/Trip & set point list, Cable Schedules, General Block diagram, Loop diagram, JB interconnection diagram & Instrument Hook up diagram.6.Review of tender documents, scope of works, drawings and specification, BOQ, Raise Technical clarifications Technical Evaluation of materials and finalization of material.7.Knowledge and Experience in International Standards and codes.8.Selection of Field Instruments based on Process condition and service according to Area Classification.9.Developing Fire Alarm System and CCTV system documents such as Datasheets, Schematic drawing, Cable Schedule & Layouts.10.Providing necessary inputs to Designer for developing Instrument location layout, cable routing layout and System Architecture after doing necessary site survey.11.Review of Construction related drawings, P & ID, Hazardous Area Layouts and vendor engineering drawings, other disciplines drawings12.Responsible for submission of Engineering deliverable's as per Document control schedule.13.Preparing detailed procurement schedule containing all E&I materials, list of vendor/supplier for each items and planned dates for RFQ, PO, Manufacturing Clearance & Delivery.14.Preparation of Material submission for the consultant review and approval.15.Developing RFQ's and sending to different suppliers/vendors and getting the quote as per the schedule.16.Reviewing the techno commercial offer, technically clearing the items in coordination with supplier/vendor and negotiating with them for best price, payment terms and delivery.17.Developing purchase order with necessary terms and condition.18.Developing purchase order with necessary terms and condition.19.Tight follow-up with vendor for delivery of material Updating procurement schedules as per the actual status of RFQ, PO, manufacturing clearance and Delivery of Material.20.Installation, Testing and commissioning assistance for field instruments like Pressure switch, Level Switch, Flow Switch, RTG, Pressure Transmitter, Flow Transmitter, Level Transmitter and MOV's.21.Working Knowledge in serial communication like Modbus and Profibus22.Responsible for raising material and work inspection request, carrying out the inspection of the complete work and getting approval from the consultant
-Source (Mitula)

Required Automobile Workshop Supervisor Service Adviser

Job Description Responsibilities:- 1.Ensure full utilization of workshop available labor and resources to achieve planned operational targets 2.Supervise subordinates to produce quality work 3.Allocate job cards and manages technicians to maximize the throughput by aligning jobs to skill sets within team 4.Ensure that the technicians carry out the jobs within the allotted time. 5. Ensure all pre-orders are approved and obtains customer approval for all additional work 6.Recommend warranty jobs for the approval of either Service Manager, Workshop Manager. 7. Ensure the workshop observes all warranty process conditions, and supervises the correct tagging and storage of warranty parts. 8. Ensure all required information on each job card for each job is properly maintained. 9. Inform the Service Adviser and Workshop Manager if necessary on any unclear working instructions or costly extensions on the repair 10. Has sufficient knowledge in using computer diagnosing systems and workshop/vehicle software Skills:- Currently working for in U.A.E. as Workshop Supervisor/Service adviser At least 3 years U.A.E. experience in a fully equipped automobile workshop Customer service oriented Effective communicator Stress Management aptitude and problem solver Firm and organised, with leadership skills
-Source (Mitula)

Required Auto Electrician in Dubai

JOB DUTIES AND RESPONSIBILITIES 1.To diagnose and undertake electrical repairs on a wide variety of vehicles and plant. 2.To undertake electrical installation of accessories and ancillary equipment on a wide variety of vehicles and plant. 3.To test and repair digital control systems including ABS controls. 4.To service and repair ancillary parts and equipment as required. 5.To inspect, maintain and repair all types of petrol and diesel engine motor vehicles and plant operated by the Authority and its customers. 6.To requisition parts and equipment as necessary. 7.To liaise with manufacturers and/or agents on problems to achieve an efficient repair. 8.To keep own vehicle clean and tidy and clean and tidy any site or work area after use (if appropriate). 9.To complete all documentation including inspection sheets, certificates, receipts applying signatures as appropriate. 10.To note the details of any accident incurred whilst driving any vehicle owned, operated by or in the custody of County Transport and submit them to the Foreman Mechanic or Service Manager. 11.To identify repairs required through unfair wear and tear and advise the Service Manager/Foreman mechanic. 12.To undertake training as may be required and product training by consultation. 13.To carry out work within a realistic time, be this time either manufacturers, locally negotiated or a combination of both or by agreed schedules of work. 14.To record all times and attendance hours to facilitate payment. 15.To be read in conjunction with County Transport General Requirements. 16.Duties and Responsibilities General
-Source (Mitula)
Advertisements

Proposal Engineer Waste Water Treatment Plants Sharjah Job

Job Description 1. Responsible for all aspects of Proposal Management including process design and cost estimation. 2. Lead the Proposal process to structure creative, commercially and technically sound quality documents as per the budget and within specified time frames. 3. Ensure specification compliance and also evaluate viable and competitive alternate process technologies / schemes. 4. Prepare Process Calculations, Hydraulic Calculations, P and ID, Layout, Process flow and Mass Balance Diagrams and Hydraulic flow Diagrams, etc. 5. Prepare Mechanical equipment list, Bill of quantities and estimate costs 6. Develop and maintain Cost Data files for various bought out items and update them periodically 7. Provide prompt resolutions to the project team if there are any technical issues during the execution stage and ensure that budget cost are adhered to. Send us the CV on Salary: Attractive tax free salary plus annual benefits Industry: Water Treatment / Waste Management Functional Area: Sales, Business Development Role Category: Corporate Sales Role: Proposal Keywords: Waste Water Treatment, Proposals Desired Candidate Profile Education UG B. TECH/B.E. Chemical) Applicants should be aged 26 to 30 years with a degree in Chemical engineering with 4 to 8 years in the Proposal function of a waste water treatment company. Experience in waste water treatment systems such as MBR, MBBR, SBR, etc. is desirable. They should also have good knowledge of process design and cost estimation of waste water treatment plants. Company Profile Water and waste water Treatment Company based at Sharjah in the UAE. They manufacture, distribute and supply a range of state of the art water treatment solutions for industrial, commercial and domestic applications. Their equipment include R.O. and D.M Plants of small to medium capacity, water filtration and high purity systems, UV disinfection systems, electro dialysis reversal, softeners, STPs and water packaging machinery. For their commercial and industrial water and waste water treatment operations, which also includes water treatment chemicals, they require a talented chemical engineering professional with experience in Proposals for waste water treatment plants
-Source (Mitula)

Proposal Engineer Waste Water Treatment Plants Sharjah Vacancy in Dubai

Job Description 1. Responsible for all aspects of Proposal Management including process design and cost estimation. 2. Lead the Proposal process to structure creative, commercially and technically sound quality documents as per the budget and within specified time frames. 3. Ensure specification compliance and also evaluate viable and competitive alternate process technologies / schemes. 4. Prepare Process Calculations, Hydraulic Calculations, P and ID, Layout, Process flow and Mass Balance Diagrams and Hydraulic flow Diagrams, etc. 5. Prepare Mechanical equipment list, Bill of quantities and estimate costs 6. Develop and maintain Cost Data files for various bought out items and update them periodically 7. Provide prompt resolutions to the project team if there are any technical issues during the execution stage and ensure that budget cost are adhered to. Send us the CV on Salary: Attractive tax free salary plus annual benefits Industry: Water Treatment / Waste Management Functional Area: Sales, Business Development Role Category: Corporate Sales Role: Proposal Keywords: Waste Water Treatment, Proposals Desired Candidate Profile Education UG B. TECH/B.E. Chemical) Applicants should be aged 26 to 30 years with a degree in Chemical engineering with 4 to 8 years in the Proposal function of a waste water treatment company. Experience in waste water treatment systems such as MBR, MBBR, SBR, etc. is desirable. They should also have good knowledge of process design and cost estimation of waste water treatment plants. Company Profile Water and waste water Treatment Company based at Sharjah in the UAE. They manufacture, distribute and supply a range of state of the art water treatment solutions for industrial, commercial and domestic applications. Their equipment include R.O. and D.M Plants of small to medium capacity, water filtration and high purity systems, UV disinfection systems, electro dialysis reversal, softeners, STPs and water packaging machinery. For their commercial and industrial water and waste water treatment operations, which also includes water treatment chemicals, they require a talented chemical engineering professional with experience in Proposals for waste water treatment plants. Email
-Source (Mitula)

Al Rafid Insulation Contracting LLC, Sharjah

Al Rafid Insulation Contracting LLC, Sharjah industrial area is looking for a Foreman. Must have UAE Experience. and UAE Driving License. Send CV to: alrafidinsulation1998@gmail.com or call from 8 am to 5 pm on tel: 06-5437980
-Source (Mitula)

Experienced CARPENTER for Packing

Looking for Experienced CARPENTER for Packing. 1 – Fabricates wooden crates or boxes, using woodworking hand tools powered tools, and packs such items as machinery, vehicles, or other large or odd-shaped products. 2 – Reads blueprints, shipping notices and other specifications and inspects product to define size and shape of container, materials to be used and types of supports braces to be used. 3 – Lays out dimensions on materials with ruler, measuring tape and pencil. 4 – Assembles materials, using nailing or stapling machine, screws, bolts, glue, and hand tools. Places product in container, manually or using hoist 5 – Bolts heavy pieces to bottom of container or skid 6 – Wraps pads product with excelsior, paper or other packing material 7 – Builds crate around large or odd-shaped articles 8 – Wraps tightens metal bands around crate, using banding equipment 9 – Attaches identification labels or stencils containing such information as shipping destination, weight, and type of product contained on crate. 10 – May move container to shipping area, and move lumber, paper, and other wrapping supplies to crating area, using hand or industrial truck
-Source (Mitula)

Accountant

Part Time Accountant Location: Dubai, United Arab Emirates Job Details: •Required for an International Drilling Company Part-time ACCOUNTANT For project jobs With high proficiency in MS Excel and PowerPoint. Interested candidates can apply with updated resume
-Source (Mitula)

Required General Manager € Joinery European / Arabic

We are looking to recruit General Manager Joinery (European / Arabic) for the UAE. My client is one of top notch joinery based in UAE. The incumbent must have solid experience in top joineries with revenue of 100M per annum, preference will be given to someone with over 20+ years experience with UAE / GCC experience. Must have estimation, commercial, operation, P and L experience. Please direct your cv at
-Source (Mitula)
Page No: 1